Drip irrigation dry spots in a raised bed can show up even when every emitter is clean and the pressure checks out fine, because the problem usually isn’t the equipment, it’s the layout. This guide covers four specific causes behind raised bed drip irrigation uneven coverage: emitters lined up at the same spot on every … Read more
Drip irrigation leaking in a raised bed almost always comes from one of three places: a threaded fitting, a barbed connection, or the tubing body itself, and each one gets fixed a different way. This guide walks through what each leak location looks like, why it happens, and the specific repair for it, instead of … Read more
A drip system running on a timer that sounds careful enough can still overwater a raised bed, and the symptoms often get blamed on disease or nutrients instead of the schedule itself. This guide walks through what overwatered plants from drip irrigation actually look like, including yellowing lower leaves, soggy soil that won’t drain, and … Read more
Drip irrigation pressure problems in raised beds come in two completely opposite forms: too much pressure causes misting, spraying, and fittings that pop off; too little causes weak or nonexistent flow at the far end of the line. Both get blamed on clogged emitters, and both end up getting treated the wrong way as a … Read more
Clogging is the most common reason drip emitters stop working in raised bed gardens, but before you pull anything apart, the pattern of which emitters are failing tells you whether you actually have a clog or a pressure problem. Those two issues need different fixes. This article covers how to confirm clogging, identify which type … Read more